Products

Wittmann Robots and Periferials
Robots and Auxiliary Equipment for the plastics processing industry
  • WITTMANN is offering an entire range of robots for the flexible automation of injection molding machines – from small models, up to machines with very large clamping forces.

  • Granulators.
  • Gravimetric blenders, volumetric dosing.
  • Water flow and temperature controllers.
  • Conveying units, controls and accessories for the plastics industry.
  • Material dryers and drying hoppers.
  • Mould protection and cooling units.

Wittmann Battenfeld Injection Moulding Machines
The modern and comprehensive range of machinery in a modular design meets the actual and future requirements of the market, taking into consideration the best utilization of the applied energy.
  • Electrical machines, EcoPower 55-550t and EcoPower Xpress 160-500t
  • Servo-hydraulic SmartPower 25-400t
  • MacroPower 400-2000t
  • MicroPower 15t
  • Vertical Vpower Rotary table 120-300t
  • Vertical Machines 40-300t
MES-system TEMI+
The only MES you will ever need!
  • The ultimative system for productmanagement.
  • Rapportering - planlægning -overvågning - optimering - analysering.
  • For all machine brands - old models too.


Reifenhäuser Reiloy Barrels and screws Extruders
The worldwide leading manufacturer of highly wear-resistant barrels and screws for injection moulding and extrusion
  • Screws with armoured flights
    diameter 40 mm - 350 mm -Length max. 9000 mm
  • Through-hardened screws
    diameter: 14 mm - 70 mm - Length: max. 2500 mm
  • Screw design:
    3-zone screws, multi-start screws, barrier screws, vented screws, twin-screws
  • Barrels:
    Blank barrel, Semi-finished and Finished barrel
  • Twin barrels:
    wear protection exactly where it is needed in your production process


Lindner Shredder for plast
Specialists in industrial shredding.
  • Powerful shredder designed for low energy consumption and high efficiency. Large program in stationary shredders for any purpose, i.e. the Micromat.
  • Mobile shredder.




ASS-Maschinenbau End-of-Arm-Tooling
Gripper Components, Robot Hands / End-of-Arm-Tooling and Automation Systems. The Original ASS Robot Hand Kit (EOAT) from Germany. Custom made robotics.
  • More than 1,500 gripper components. Grippers, vacuum cups, profiles and special gripper components.
  • Quick change systems.
  • On-line catalog


Tosaf Color Service Masterbatch
Color Service – a part of Tosaf group.
Special effects – from metallic to shimmer, all the way to glow effects The inclusion of additives, the creation of combination batches and the use of the most varied types of polymers is possible.
And storage - one Masterbatch for diverse applications.
  • Universal MB.
  • Standard MB.
  • PE master Batch.
  • Polymer specific MB.
  • Additive- and combi-MB.


NDC-Beta LaserMike, Precision End-to-End Process
Precisely and reliably measure and control with inteligent laser and ultrasound. Additionally they offer Climat-Cells.
  • Diameter and Ovality, Eccentricity and Wall Thickness.
  • Length & Speed, Lay Length, Capacitance.
  • Lump and Neckdown Detection.


Moog og Moog-Buhl
Valves and control systems for injection molding and blow molding.
  • For updating your blow molding machines.
  • Service and repair of Moog and Moog-Buhl automatic.


SCHUMA CONVEYOR -TECHNOLOGY
Conveyor technology with unlimited flexibility. Regardless of whether you need a straight profile, an angled profile or other variants of conveyor, it is possible with SCHUMA profile-conveyors.
  • Sorting and separation. Different separation techniques and dimensions are available at SCHUMA in order to achieve an ideal separation result.
  • Stacking, Buffering and Distributing
    With the forklifts or turning and collecting tables from our production runs the goods handling smoothly.


Reifenhäuser Blown Film, Cast film and extruders
One of the globally leading providers of extrusion lines for manufacturing blown film, cast films, polishing sheets and extrusion coatings lines.
  • Blowfilm lines. 3- to 12-layer blown film lines and echnical films with barrier properties for food packaging to agricultural.
  • Cast film lines. sheet extrusion lines, extrusion coating lines and extruders.
  • Stand-alone extruders. Single-screw extruders, Twin-screw extruders.
  • Reifenhäuser Blown Film Polyrema. Mono- to 11-layer blown film lines, small coextrusion lines and upgrades.


TRIPLE R Oil filtering systems
Triple R bypass oil filters perform total oil purification by removing solid particles, sludge, varnish and water from all industrial oil types. Filter inserts -The original and still the best.
  • Standard filters without pump. 10-50 bar.
  • Filters with bypass pump.
  • Filters for diesel and bio-fuel.
  • Filters for marine applications.
  • Off-line water removing device.


Film

Wittmann Battenfeld præsentationsvideo

Se produktfilm
Salgskonsulent til plastbranchen - Jylland/Fyn.
Wiba Tech søger en ny medarbejder med "sælger-gen" til salg af vores maskiner, robotter og andet teknisk udstyr inden for plastfremstilling.


Tilbud på Tempro Primus C90.

I hele april tilbyder vi 10% rabat på vores populære Tempereringsapparat.
Deltag i DTU's "Digital Technologies for the Plastic Industry", 23 May 2023 at Comwell Kolding.

-hvor Raffaele Gualandris fra Wittmann Digital holder indlæg om "The power of MES in a Digital Production Environment: Enhancing workflows, knowledge transfer and future visions"
WITTMANN's nye "Quick New" Robot Programmering

Se, hvor enkel programmering af en robot kan være med Wittmann's NYE R9.1 robotstyringssoftware, uden at begrænse dens fleksibilitet eller kraft!
Innovations 2/2023
Wittmann's nyhedsbrev med bl.a. "25 år med Wittmann tørrere og en artikel om energibesparelse med "smarte" temperaturkontrol løsninger.
Reifenhäuser Digital extrusion

"c.Hub Middleware". Få bæredygtig indsigt og procesgennemsigtighed ved at forbinde alle dine linjer og maskiner. Skræddersyet til plastekstruderingsindustrien for nemt at analysere, visualisere og optimere din produktion.
WITTMANN demonstrerer sin LSR-bearbejdningsekspertise

Med en servohydraulisk SmartPower 120/350 LIM vil fire forskellige lukkehætter til drikkevaredåser og -flasker blive fremstillet af flydende silikone i en enkelt sprøjtestøbeproces
Innovations 1/2023
Wittmann's nyhedsbrev med interessante kundanvendelser, bl. a. "SmartPower 60 Ingrinder system".
Wittmann - en komplet succes på K 2022


Programmets hovedfokus lå på udstilling, der præsenterede imponerende beviser på virksomhedens bidrag til cirkulær økonomi, digitalisering og klimabeskyttelse.
Innovations 4/2022
Wittmann's nyhedsbrev med bl. a. 3-komponent teknologi og vellykket Airmould 4.0 intern gastryksteknologi
IMAGOxt – Måling af fordelene

Effekten af energiomkostninger i produktionen er kommet dramatisk i forgrunden med de stigende priser på primære energikilder. Sidste år tilføjede WITTMANN Digital softwarepakken IMAGOxt til sin produktportefølje. IMAGOxt giver virksomheder mulighed for at måle og visualisere flere variabler og procesparametre for udstyret, herunder strømforbrug. Se den på K.
WITTMANN BATTENFELD har med succes lanceret sin Airmould 4.0 interne gastryksteknologi

Med videreudviklingen af Airmould, der er installeret og testet hos flere kunder, er der skabt et endnu mere kompakt og brugervenligt system, som imødekommer branchens krav og giver sine brugere en række fordele. Se den på K.
Innovations 3/2022
Wittmann's seneste nyheder med troubleshooting ved "beside the press" granulering samt interessante anvendelseseksempler hos internationale kunder,
Tag energiudfordringen op! Wittmann er ikke bange for sammenligning!

Når du køber en maskine fra vores SmartPower- eller EcoPower-serie, garanterer vi, at du får den mest energieffektive maskine på markedet. Har du en sammenlignelig maskine med en bedre energibalance, tager vi vores maskine tilbage uden omkostning for dig. For at måle begge maskiner leverer vi IMAGOxt målesystemet gratis.
Nye metaleffekt masterbatches til perfekte finish

Omkostningseffektivt alternativ til overfladebelægning og galvanisering:
Den nye metalliske masterbatch fra Tosaf Color Service muliggør produktion af sprøjtestøbte dele med en delikat struktureret, praktisk talt stribefri finish, selv i kritiske områder,
Maksimal designfrihed med SmartPower Combimould

Maksimal designfrihed med SmartPower Combimould.
SmartPower-serien har allerede bevist sig selv i tusindvis af installationer og er blevet brugt af WITTMANN BATTENFELD-kunder i årtier. Teknologien er løbende blevet tilpasset og optimeret. Resultatet er en robust og pålidelig basis-maskine, der kan tilpasses kundernes behov. "Drive-on-Demand" muliggør særlig energieffektivt produktion og holder dermed CO2-fodaftrykket lavt.

Kontakt


Wiba Tech ApS

Telefon: 48 46 65 00
Email: info@wibatech.dk

Wiba Tech ApS
Kratbjerg 202
3480 Fredensborg